Generator Replacement (7.0L)

Generator Replacement (7.0L)

Removal Procedure

1. Remove the drive belt.

Caution: Refer to Battery Disconnect Caution.

2. Disconnect the negative battery cable.




3. Disconnect the generator electrical connector (1 and 2).
4. Remove the battery feed terminal nut (3) from the generator.
5. Remove the battery feed cable.




6. Remove the generator mounting bolts.
7. Remove the generator.

Installation Procedure

1. Position the generator on the mounting bracket.

Notice: Refer to Fastener Notice.

2. Install the generator bolts.

Tighten the generator bolts to 50 N.m (37 lb ft).




3. Connect the generator electrical connector (1 and 2).
4. Install the battery feed cable.
5. Install the battery feed terminal nut (3).

Tighten the battery feed cable nut to 13 N.m (10 lb ft).

6. Install the drive belt.
7. Connect the negative battery cable.