Circuit/System Verification
WARNING:
The Volt Battery Pack will utilize an exchange program. Please consult the most recent revision of bulletin/PI #PIP4841, available in Service Information (SI), for a list of approved Volt Battery Pack service procedures. Components that may be removed and serviced without exchanging the complete battery pack are identified in the bulletin/PI. Please contact the GM Technical Assistance Center if you have any questions.
If any of the DTCs P1EB2, P1EB3, P1EB4, and P1EB5 are set, program the K16 battery energy control module. The DTC should not reset.
- If the DTC P1EB2 resets, replace the K112A hybrid battery interface control module 1.
- If the DTC P1EB3 resets, replace the K112B hybrid battery interface control module 2.
- If the DTC P1EB4 resets, replace the K112C hybrid battery interface control module 3.
- If the DTC P1EB5 resets, replace the K112D hybrid battery interface control module 4.