Faulty Wheel Speed Sensor Output
- This code normally is set when Codes 11-14 are set. Test each sensor. See WHEEL SPEED SENSOR under COMPONENT TESTING
. If all sensor voltages and resistances are within specification, go to next step. If any sensor is malfunctioning, replace sensor. See WHEEL SPEED SENSOR under REMOVAL & INSTALLATION
.
- Check each wheel speed sensor-to-rotor gap. See WHEEL SPEED SENSOR under ADJUSTMENTS
. If all gaps are within specification, go to next step. If any gaps are not within specification, adjust sensor-to-rotor gap.
- Inspect all wheel speed sensor rotors for damaged and missing teeth. Replace any damaged rotors. Using an oscilloscope, check waveform patterns. See Fig 1
. If all rotors are okay, replace ECU and road test vehicle. Ensure trouble code does not reset.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.