Windshield Wipers: Description

Two speed permanent magnet windshield wiper motor is used. The two speed motor uses a three brush plate and switch assembly. When control selector is in low position, grounded brush and white wire brush are used to operate motor at low speed. When control selector is in high position, grounded brush and blue wire brush are used to operate motor at high speed. When control selector is moved to park position, motor will continue at low speed until park switch lower contacts open, stopping motor in park position. Optional intermittent wipers are available on "E" and "F" models. For normal operation on "F" models, turn wiper control knob to right for low or high speed. For intermittent operation, rotate wiper control knob to left. The more knob is rotated to left, the greater the time interval between wiper blade sweeps. On "E" models the wiper switch knob slides towards the right with the first position being intermittent, the second is low and the third position is high. As the control is moved to the left of intermittent position the interval between blade sweeps is at a maximum and as it moves to the right of intermittent detent, the blade sweep interval is reduced.