Removal & Installation
WARNING: This page is about the Bronco Automatic Trans, which is a different variant/trim than selected.
TRANS ID - C3, C4, C5
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 4.7 | 3.6 | C |
| Additional Procedure: TRANSMISSION ASSEMBLY: Removal & Installation: |
| w/Trans Skid Plate add | | 0.2 | 0.2 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.5 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | 0.3 | C |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.1 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANS OIL PUMP: Remove & Replace or Overhaul: |
| Front | | 0.7 | 0.7 | B |
| Combination Procedure: TRANS OIL PUMP BUSHINGS & SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |
TRANS ID - C6
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 6.1 | 4.9 | C |
| Additional Procedure: TRANSMISSION ASSEMBLY: Removal & Installation: |
| w/Trans Skid Plate add | | 0.2 | 0.2 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.5 | 0.5 | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | 0.3 | C |
| Combination Procedure: OIL COOLER LINES: Flush/Replace: |
| | 0.3 | 0.2 | C |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.1 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANS OIL PUMP: Overhaul: |
| Front | | 0.8 | 0.8 | B |
| Combination Procedure: TRANS OIL PUMP BUSHINGS & SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |