LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1978 >> Pinto Pony, 2D Sedan, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Feedback Carb. System >> Testing & Diagnosis >> Data Collection >> Test Sequence I
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Sequence I

  1. See Figure. See Figure. Install Speed Control Tester (Snap-On GA-437) and set engine to 2200-2800 RPM.
  2. Set test selector switch to position "1". Set DVOM to "TESTER" position. Perform test sequence as shown in data chart and record all data.
scientia non olet · About LEMON Manuals