Anti-Stall Dashpot Adjustment
NOTE:
Engine idle speed and carburetor air/fuel mixture must be properly set before dashpot is adjusted.
- With engine at normal operating temperature, remove air cleaner and attach a tachometer to engine.
- Move throttle lever until it contacts dashpot rod. Engine speed should read 2100-2300 RPM. If speed is not within specifications, loosen dashpot lock nut.
- Hold throttle lever to maintain the correct engine speed, then turn dashpot until dashpot rod contacts throttle lever. Tighten lock nut and recheck dashpot adjustment. Repeat adjustment as necessary.