Free Running Test
With starter in test bench, take readings of starter current, voltage and RPM. Readings should be within specifications.
NOTE:
Starter must be mounted to prevent meshing of pinion and ring gear even in engaged position. If starter has warmed up during previous tests, RPM will be higher.
SPECIFICATIONS
| Brush Length & Spring Tension | ||
|---|---|---|
| Application | In. (mm) | Lbs. (g) |
| 208 xxx | .52 (13) | 2.5-3.1 (1150-1350) |
| 211 xxx | .52 (13) | 2.5-2.9 (1150-1300) |
| 212 xxx | .52 (13) | 2.4-2.7 (1080-1220) |
| 311 xxx | .39 (10) | 2.5-2.9 (1150-1300) |
| 312 xxx | .39 (10) | 1.8-2.0 (800-900) |
| 314 xxx | .52 (13) | 2.5-2.9 (1150-1300) |
| 362 xxx | .61 (15.5) | 2.5-2.9 (1150-1300) |