Vacuum Differential Valve (VDV)

This valve controls the operation of the bypass valve that doesn't have an integral differential valve. The VDV is inserted in the control vacuum line to the bypass valve and serves to cut off vacuum and de-energize the bypass valve.

The differential valve consists of a diaphragm connected to a dump valve that controls vacuum to bypass valve. During normal operation, vacuum is equalized on both sides of diaphragm and the spring holds dump valve closed. When sudden higher than normal vacuum is encountered, such as under deceleration conditions, vacuum is higher on dump valve side of diaphragm and the diaphragm operates the dump valve. As the dump valve operates, the vacuum signal to bypass valve is diverted through the built-in filter system to atmosphere. When the vacuum bleeding through bypass timing orifice in the VDV has equalized on both sides of diaphragm, the diaphragm return spring once again closes the dump valve and applies vacuum to the bypass valve, which again directs pump air to the exhaust ports.