LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1981 >> Courier 2.3L Eng VIN 2, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> DECEL Throttle Modulator >> Testing >> Solenoid Vacuum Valve Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Solenoid Vacuum Valve Test

  1. With engine at normal operating temperature, engine idling and transmission in neutral, make sure choke plate is fully open.
  2. Turn off air conditioner or power take-off if equipped. Disconnect vacuum supply hose at solenoid valve and check for vacuum. If no vacuum is present, clean or replace hose as required.
  3. If a vacuum delay valve is used, remove valve and install a straight connector. Disconnect wires to solenoid valve. With a jumper wire, apply battery voltage to one of the solenoid terminals. The engine speed should not increase. If it does, replace the valve.
  4. Using a second jumper wire, ground the other terminal of the valve. The engine speed should increase, if not, replace the valve.
  5. Remove the ground jumper wire. The engine should return to idle within 15 seconds. If not, replace the valve.
scientia non olet · About LEMON Manuals