All Models
- Fill pump reservoir to proper level. Start engine and run mometarily. Stop engine and recheck fluid level. Add fluid if necessary. Repeat procedure until fluid level remains constant after running engine. Raise and support vehicle so that front wheels are off of ground.
- Start engine and turn steering wheel from side to side several times (without hitting stops). Do not hold wheel in full left or right position. Ensure that fluid level remains above pump inlet in reservoir. Fluid with air in it will have a light tan or red appearance. All air in fluid must be eliminated before normal steering action can be obtained.
- Return wheels to center position and operate engine for another 2-3 minutes. Road test vehicle and recheck fluid level. Level must be at hot mark on dipstick.