Water Separator
- When the water level in the water separator reaches a maximum level, a warning lamp on the dash will light up. The warning lamp will also light up whenever the key is in the "Start" position. When the warning lamp is lit, it is necessary to drain water from the separator.
- Stop vehicle and shut off engine. Pull up on the remote control drain handle (located behind driver's seat) and hold valve open until about 45 seconds after light goes out. Release remote handle.
- Restart the engine and check the warning lamp. If the warning lamp is still lit, fuel system needs to be checked or repaired. The only serviceable item on the separator is the water level sensor.