LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1984 >> EXP 1.6 8 >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Multi-Point >> Testing & Diagnosis >> Injectors >> Injector Resistance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Injector Resistance

  1. Unplug 60 pin connector from ECA and install Breakout Box to harness. Leave processor disconnected. Unplug injectors No. 2, 3, and 4. Measure resistance of injector No. 1 between pins 37 and 58.
  2. Unplug injector No. 1. Connect injector No. 2. Read resistance between pins 37 and 58. Unplug injector No. 2. Connect injector No. 3. Read resistance between pins 37 and 59.
  3. Unplug injector No. 3. Connect injector No. 4. Read resistance between pins 37 and 59. All reading must be 2.0-3.5 ohms. If not, repair/replace defective harness or injectors.
scientia non olet · About LEMON Manuals