LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1984 >> Ranger 2.2 P >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - DURA-Spark II >> Testing >> Pick-Up Coil Resistance Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pick-Up Coil Resistance Check

  1. Disconnect distributor connector from wiring harness. Connect ohmmeter leads to distributor connector terminals that mate with Orange and Purple wires of control module. Measure resistance of pick-up coil. Reconnect distributor connector to wiring harness.
  2. Resistance should be 400-1000 ohms. If resistance is within this range, pick-up coil is OK. If resistance is not within specified range, replace pick-up coil assembly.
scientia non olet · About LEMON Manuals