LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1987 >> Bronco II 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> CEC Diagnosing & Testing >> Quick Test >> Timing Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Timing Check

NOTE: If engine will not start, go to TEST A - NO START . If engine starts but stalls while testing, go to DIAGNOSIS BY SYMPTOM  TEST.
  1. Turn ignition off and wait 10 seconds. Verify that SELF-TEST has been activated. Restart engine and check timing while in SELF-TEST mode. You are allowed 2 minutes to check timing from the time the last code is displayed.
  2. Correct SELF-TEST timing equals base ignition timing (10° BTDC on all engines) plus 17-23° BTDC. If timing is not 27-33° BTDC, go to TEST GG - SPARK TIMING CHECK . If timing is 27-33° BTDC, go to KEY ON/ENGINE RUNNING (KOER) SELF-TEST .
scientia non olet · About LEMON Manuals