Removal & Installation
TRANS ID - A4LD
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3.4 | 2.5 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.5 | 0.5 | C | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: OIL PUMP: Remove, Install, and Overhaul: | ||||
| Front | 0.7 | 0.4 | B | |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| Front | 0.1 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANS OIL PUMP SEAL & BUSHING: Remove & Replace: | ||||
| Front | 0.2 | B | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.6 | C | |||
TRANS ID - AOD, AOD-E, AODE-W, AOT, 4R70W, 4R75E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 4.6 | 3.2 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.5 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: OIL COOLER LINES: Flush/Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: OIL PUMP: Overhaul: | ||||
| Front | 0.7 | B | ||
| Combination Procedure: OIL PUMP: Remove & Replace: | ||||
| Front | 0.4 | B | ||
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| Front | 0.2 | B | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.6 | C | |||