LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1988 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Alignment Specifications >> Bronco II & Ranger - 4WD
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Bronco II & Ranger - 4WD

WHEEL ALIGNMENT SPECIFICATIONS (BRONCO IIR - 4WD)

Application Specification
Ride Height in Inches 2 3/4
Adjustment Procedures See Figure
Camber in Degrees (Fraction) -1 +/- 3/4
Camber in Degrees (Decimal) -1.0 +/- 0.75
Caster in Degrees (Fraction) 6 3/4 +/- 1 1/2
Caster in Degrees (Decimal) 6.75 +/- 1.50
Toe-In in Inches (Fraction) 1/32
Toe-In in Inches (Decimal) 0.031
Toe-In in Degrees (Fraction) 1/16
Toe-In in Degrees (Decimal) 0.063
Toe-Out on Turns (1)
Steering Axis Inclination (SAI) (1)
Ride Height in Inches 3 1/4
Adjustment Procedures See Figure
Camber in Degrees (Fraction) 0 +/- 3/4
Camber in Degrees (Decimal) 0 +/- 0.75
Caster in Degrees (Fraction) 5 1/2 +/- 1 1/2
Caster in Degrees (Decimal) 5.50 +/- 1.50
Toe-In in Inches (Fraction) 1/32
Toe-In in Inches (Decimal) 0.031
Toe-In in Degrees (Fraction) 1/16
Toe-In in Degrees (Decimal) 0.063
Toe-Out on Turns (1)
Steering Axis Inclination (SAI) (1)
Ride Height in Inches 3 1/2
Adjustment Procedures See Figure
Camber in Degrees (Fraction) 1 +/- 3/4
Camber in Degrees (Decimal) 1.0 +/- 0.75
Caster in Degrees (Fraction) 4 1/2 +/- 1 1/2
Caster in Degrees (Decimal) 4.50 +/- 1.50
Toe-In in Inches (Fraction) 1/32
Toe-In in Inches (Decimal) 0.031
Toe-In in Degrees (Fraction) 1/16
Toe-In in Degrees (Decimal) 0.063
Toe-Out on Turns (1)
Steering Axis Inclination (SAI) (1)
Ride Height in Inches 4
Adjustment Procedures See Figure
Camber in Degrees (Fraction) 2 +/- 3/4
Camber in Degrees (Decimal) 2.0 +/- 0.75
Caster in Degrees (Fraction) 3 1/2 +/- 1 1/2
Caster in Degrees (Decimal) 3.50 +/- 1.50
Toe-In in Inches (Fraction) 1/32
Toe-In in Inches (Decimal) 0.031
Toe-In in Degrees (Fraction) 1/16
Toe-In in Degrees (Decimal) 0.063
Toe-Out on Turns (1)
Steering Axis Inclination (SAI) (1)
Ride Height in Inches 4 1/4
Adjustment Procedures See Figure
Camber in Degrees (Fraction) 3 +/- 3/4
Camber in Degrees (Decimal) 3.0 +/- 0.75
Caster in Degrees (Fraction) 2 1/2 +/- 1 1/2
Caster in Degrees (Decimal) 2.50 +/- 1.50
Toe-In in Inches (Fraction) 1/32
Toe-In in Inches (Decimal) 0.031
Toe-In in Degrees (Fraction) 1/16
Toe-In in Degrees (Decimal) 0.063
Toe-Out on Turns (1)
Steering Axis Inclination (SAI) (1)
(1) Information not available.
scientia non olet · About LEMON Manuals