ECA 4 - Code 09 - Coolant Temperature Sensor
- Check for loose connectors, corrosion or damage at coolant temperature sensor and ECA terminal 2I. Repair as necessary.
- Check resistance across temperature sensor terminals. Resistance should be 62-104 ohms. If resistance is incorrect, replace temperature sensor.
- If resistance is within specification, turn ignition on and check for voltage at ECA terminal 2I. If voltage reading is 5 volts, check for open in wire between temperature sensor Brown/Red terminal and ECA terminal 2I. Repair as necessary.
- If voltage reading is 0-2.5 volts, check for short in wire between temperature sensor Brown/Red terminal and ECA terminal 2I. Repair as necessary.
- If no short is indicated, go to ECA 8. If symptom persists, go to ECA 55 .