Integrated Control Relay Module: Service and Repair

Fan, Motor and Integrated Relay Control Assembly

Removal and Installation

Integrated Relay Control Module:

Fig. 41 Cooling Fan Motor Replacement:

1. Remove radiator sight shield.
2. Disconnect electrical connector. Remove integrated relay control assembly located on radiator support.
3. Disconnect electric fan connector.
4. Unbolt fan/shroud assembly from radiator.
5. Rotate fan/shroud assembly and remove past radiator.
6. Remove fan U-spring retainer from motor shaft and remove fan.
7. Unbolt fan motor from shroud.
8. To install, reverse Steps 1 through 7.