Vane Air Meter: Installation

1. Clean mounting surfaces. Mount vane air meter on air cleaner tray, making sure gasket is seated and aligned. Secure air meter assembly to air meter bracket with 3 special screw/washer assemblies (2 of No. N605786-S2 and 1 No. N605789-S2 screw). These screws are different sizes and must go in correct opening.
2. Connect vane air meter inlet hose and tighten clamp. Install air cleaner housing/vane meter bracket to fender wall with 4 retaining screws. Connect all hoses to air cleaner housing. Connect air meter electrical connector. Install air cleaner element and housing cover.

Ensure mounting surfaces are clean. Mount air vane meter on air cleaner housing bracket. Secure air meter assembly to air meter bracket with 3 special screw/washer assemblies (2 of No. N802748-S2 and 1 No. N602736-S2 screw). These screws are different sizes and must go in correct opening. Reverse removal procedure to complete installation.