Ignition Checks: FESTIVA: Spark
- Crank engine. Check for a strong Blue spark at coil wire (if applicable) and at each spark plug wire by using a low voltage spark tester (or holding wire 5/16" from ground). Ensure spark plug wire resistance of each wire is 4000-6000 ohms per foot.
- Disconnect and inspect all related ignition system connectors and harness. Clean or repair as necessary and recheck spark. If still no spark, go to next step.
- Check distributor rotor, cap, armature and module for wear, breakage, cracks, carbon build-up and oxidation. Crank engine to verify that distributor turns steadily. If distributor is okay, go to IGNITION COIL POWER SOURCE below. If distributor is not okay, go to N - REMOVE/INSTALL/OVERHAUL article for distributor disassembly.