LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Bronco 4.9 Y, Standard, M5OD-R2 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> DISTRIBUTORLESS Ignition System (Dis) - No Start (4.0L) >> Test 3, Check Pip At EDIS Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test 3, Check Pip At EDIS Module

Turn key off. Connect EDIS diagnostic cable to breakout box. Using EDIS No. 6 overlay. Connect LED test lamp between J43 (PIP E) and J7 (GND). Crank engine. If LED blinks continuously, go to TEST 4. If light does not blink, go to TEST 7.