Test J: Step 94

94) Check EEC-IV Harness  A Continuous Memory Code 96, without an accompanying Continuous Memory Code 87 indicates that during vehicle operation, one of the following has occurred:

• An open in the BATT + circuit between the BATT + and the fuel pump relay
• Fuel pump relay contacts opened
• Open in the POWER-to-PUMP circuit from the fuel pump relay to the FPM splice, if applicable.

With engine running attempt to cause a miss or stumble while performing WIGGLE TEST on pump harness and connectors. With key off, inspect all fuel pump connectors and BATT + for damage or corrosion. If a fault is found, isolate and repair it as necessary. Clear Continuous Memory Codes and rerun QUICK TEST. If no fault is found, fault may not be duplicated at this time. Clear Continuous Memory Codes, Code 96 testing is complete.