LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Test Ml - Check Engine/Malfunction Light >> Test Ml: Step 25
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Ml: Step 25

25) Continuous Memory Code 70, 71 and 72: CHECK ENGINE or CHECK DCL Message Displayed  Codes 70, 71 and 72 indicate a circuit failure has occurred on the Data Communications Link (DCL). These codes can occur alone or in conjunction with another code. CHECK ENGINE or CHECK DCL message will be displayed when:

If vehicle is a NO START, go to TEST A, step 1). Perform KOEO Self-Test, if the result is a Pass Code (11-10-11), repair fault in electronic message center Data Communications Link (DCL). If Pass Code is not displayed, service codes as described in Self-Test procedures.