LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Bronco II RWD, Standard, M5OD-R1 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System (Diesel) >> Injection Pump >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Injection Pump: Installation

  1. Install NEW "O" ring onto injection pump drive gear end. Install pump into position, aligning dowel on pump drive shaft with hole in drive gear. If necessary, rotate pump drive shaft to align dowel with hole.
  2. Install injection pump-to-drive gear bolts. Install injection pump-to-adapter nuts. Align reference lines on pump flange and adapter. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals