Test 13, Check Right Coil Circuit

Connect LED test light between (+) J23 (RC1C) and (-) J60 (BAT-). Does test light illuminate? Connect LED test light between (+) J24 (RC2C) and (-) J60 (BAT-). Does test light illuminate? If test light illuminates during both tests, one or both coil wires are shorted to VBAT. Service connectors and harness and check for fault codes. See TESTS W/CODES article. If test light does not illuminate during both tests, replace right coil pack and check for fault codes. See TESTS W/CODES article.