Clearing Keep Alive Memory (KAM)

The ECA has the ability to adapt and correct for minor system faults or variances. When any component is replaced or a fault is corrected, the Keep Alive Memory (KAM) should be cleared to erase the outdated or bad adaptive information stored by the processor.

To clear KAM, disconnect the negative side of the battery for a minimum of five minutes.

After KAM has been cleared, the vehicle may exhibit certain driveability problems. It will be necessary to drive the vehicle 10 miles or more to allow the ECA to relearn values for optimum driveability and performance. (Distance is dependent on the specific vehicle.)