Test DH: Step 94

94) Continuous Memory Code 63: Monitor TP Circuit Under Simulated Road Shock Conditions  Using KOEO Continuous Monitor Mode, observe VOM or diagnostic tester for indication of fault while doing the following:

• Slowly open throttle to WOT
• Slowly bring throttle to closed position
• Lightly tap TPS and wiggle connector

This test attempts to find an open or short in the TPS, connectors and vehicle harness. If fault is indicated, disconnect TPS. Inspect connectors and terminals. If connectors and terminals are okay, replace TPS. Clear Continuous Memory Codes and repeat QUICK TEST. If no fault is indicated, go to next step.