Test TC: Step 96

96) Isolating Faults For Continuous Memory Codes 49, 59, & 69  Codes 49, 59 and 69 indicate that the transmission went through 4 consecutive incorrect shifts in an upward or downward shift sequence. When changing a gear the SS1 or SS2 solenoid remained ON or OFF an extended amount of time. Possible causes for these faults are: intermittent harness continuity, stuck shift solenoid. Rerun KOEO Self-Test. If any other codes appear during the KOEO Self-Test in addition to Codes 49, 59 or 69, service other codes first. If other codes do not appear, go to next step.