Super Star II Tester
Set center button in the TEST position. Turn ignition switch to ON position. Turn tester on. When activated, the tester should display 888 for 2 seconds. Release and reset button in the TEST position. After all codes are received, release center button. All codes received in tester memory may now be reviewed.
SERVICE CODE REFERENCE
| Service Code | Circuit | Circuit Test |
|---|---|---|
| 02 | CPS | A2 |
| Vehicle Battery | N/A | A6 |
| Ref. Voltage & Signal | N/A | A7 |
| 08 | VAF | B2 |
| 09 | ECT | B3 |
| 10 | VAT | B4 |
| 14 | BP | B6 |
| 15 | EGO | C1 |
| 17 | EGO | C1 |
| 26 | CANP | C4 |
| 34 | ISC | D1 |
| Self-Test Input | N/A | D3 |
| Self-Test Output | N/A | D4 |