LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Probe GL, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel - Standard >> Testing >> Warning Light System Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Warning Light System Check

  1. Turn ignition switch to "ON" position (engine not running). Observe operation of warning lights. Start engine. Again observe operation of warning lights.
  2. If brake warning light will not come on when ignition switch is turned on (engine not running), proceed to BRAKE WARNING LIGHT CHECK  .
  3. If seat belt warning light will not come on when ignition switch is turned on (engine not running), proceed to SEAT BELT WARNING LIGHT INOPERATIVE CHECK  .
  4. If check engine warning light will not come on when ignition switch is turned on (engine not running), go to ECA CHECK.
  5. If Anti-Lock Brake (ABS) warning light will not come on when ignition switch is turned on (engine not running), go to ANTI-LOCK SIGNAL CHECK 2.
  6. Start engine. If brake warning light will not go off when engine is running, go to BRAKE LIGHT WILL NOT GO OFF  .
  7. If seat belt warning light will not go off when engine is running, go to SEAT BELT WARNING LIGHT SHORT CHECK 1  .
  8. If check engine warning light will not go off when engine is running, go to CHECK ENGINE WARNING LIGHT WILL NOT GO OFF  .
  9. If ABS warning light will not go off when engine is running, go to ABS SIGNAL CHECK 1  .
scientia non olet · About LEMON Manuals