Upper Intake Manifold - 2.2L: Removal
- Disconnect negative battery cable. Drain coolant. Remove accelerator cables and air duct from throttle body. Mark and remove all vacuum hoses from throttle body.
- Disconnect all electrical connections at throttle body. Remove engine lifting bracket mounting bolts from throttle body and engine block. Remove coolant line/EGR hose retaining bracket from throttle body. Remove all brackets from upper intake manifold.
- Remove PCV hose from upper intake manifold. Mark and remove vacuum lines from upper intake manifold. Remove upper intake manifold retaining nuts and bolts. Remove upper intake manifold and gasket.