Intake Elbow Adapter/Outlet Tube Connection

For leaks at intake elbow adapter to outlet tube joint, do the following steps below.

1. Slightly loosen nut retaining outlet tube to alternator-power steering pump bracket.
2. Loosen bolt retaining outlet tube to cylinder block support bracket bottom.
3. Tighten nuts at intake elbow adapter to 15-22 ft.lbs. (20-30 N.m).
4. Tighten nut at alternator-power steering pump bracket to 30-40 ft.lbs. (40-55 N.m).
5. Tighten bolt retaining outlet tube to cylinder block support bracket to 30-40 ft.lbs. (40-55 N.m).
6. Recheck all joints with propane.