LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Probe GL, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Variable Assist >> Pinpoint Tests >> Pinpoint Test C4 - Steering Angle Sensor Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test C4 - Steering Angle Sensor Check

  1. Disconnect steering angle sensor connector. Set steering wheel straight. Set VOM on 200K scale. Measure resistance between Green and Green/White wires while turning steering wheel slowly from straight to 180 degrees left. If resistance decreases from 25K ohms to approximately 200 ohms, proceed to PINPOINT TEST C5  . If resistance is NOT within specification, replace steering angle sensor.
  2. With steering wheel straight, measure resistance between Green and Green/Yellow wires. If resistance is between 40-60K ohms, proceed to PINPOINT TEST C5  . If resistance is NOT within specification, replace steering angle sensor.
scientia non olet · About LEMON Manuals