LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Probe GL, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel - Electronic >> Testing >> Keyboard Function Check 4
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyboard Function Check 4

  1. Using Gauge System Tester (Rotunda 021-00055), connect one lead of tester to Black/Yellow wire at keyboard 10-pin connector.
  2. Instrument keyboard 10-pin connector is located behind trip computer keyboard. See Figure .
  3. Slowly adjust resistance from 0-1000 ohms and back to 0 again. Check to see that METRIC, ETA, SET and RESET functions are working.
  4. If no functions are working, go to KEYBOARD FUNCTION CHECK 5  . If all functions are working, replace keyboard. If some functions are working, replace trip computer.
scientia non olet · About LEMON Manuals