Test Equipment

Following test equipment is necessary to complete DIS ignition system tests.

DIS Diagnostic Cable (Rotunda 007-00044)
Spark Tester (Neon Bulb Type)
Digital Volt-Ohmmeter (DVOM)
Remote Starter Switch
Breakout Box (BOB) With 2.3L DP DIS Overlay
High Voltage Spark Tester (A spark plug with a broken side electrode is not sufficient to check for spark and may lead to incorrect results.)
Tachometer
Inductive Type Timing Light (DO NOT use "advance knob", if equipped, as it will not work correctly with DIS Ignition Systems.)
Test Light (LED Type) Or Logic Probe (LED Type)

CAUTION: A 12-volt incandescent (high voltage) test light SHOULD NOT be used to test CID or PIP circuit signals. It will load the circuit and may cause incorrect measurements or faulty DIS/ECA operations (engine stall).