LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Bronco 4.9 Y, Standard, M5OD-R2 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 4.9L >> Test QC - Output State Check Not Functioning >> Output State Check >> Diagnostic Aids
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Aids

Perform this circuit test when directed by other CIRCUIT TESTS. This test is intended to diagnose only the following:

1) Check For Codes 23, 53, 63, 121, 122 Or 123  If vehicle is equipped with a speed control, speed control servo must be electrically disconnected. This prevents speed control system from affecting throttle plate movement during Output State Check. Rerun QUICK TEST or Output State Check.

Turn ignition off and wait 10 seconds. Perform KOEO SELF-TEST. If Codes 23, 53, 63, 121, 122 or 123 are displayed, go to appropriate KOEO SELF-TEST CODES chart under CODE-TO-TEST MENU(S) and service code(s) as necessary. If no code is displayed, go to TEST QA, step 1). If Code 11/111 (pass code) is displayed, go to next step.

2) Check Throttle Linkage  Check throttle and linkage for sticking or binding. If throttle and linkage are okay, replace TPS and repeat QUICK TEST. If throttle and linkage are binding, repair as necessary and repeat QUICK TEST.

scientia non olet · About LEMON Manuals