Retrieving Codes
Service codes are retrieved from the EEC-IV system through the self-test connector. Various methods and test equipment may be used to access these codes. The following test equipment may be used:
- Analog Volt-Ohmmeter (VOM)
- "Scan" Tool
- STAR Series Tester
- In-Dash CHECK ENGINE or SERVICE ENGINE SOON Light
SELF-TEST CONNECTOR LOCATIONS
| Application | Location |
|---|---|
| Escort (1.9L) | Right rear of engine, near cowl. |
| Tracer (1.9L) | Left rear corner of engine compartment. |