LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Explorer 4D Utility, RWD, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Load Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Load Testing

  1. Connect starter load tester and voltmeter on battery terminals. Ensure no current is flowing through the ammeter and carbon pile of tester. Disconnect terminal "S" of starter relay.
  2. Connect remote starter switch between terminal "S" and positive battery terminal. Ensure transmission is in Park on A/T models or Neutral on M/T models prior to testing starter.
  3. Crank engine with ignition off and note voltmeter reading. Stop cranking engine. Turn carbon pile tester rheostat knob to match voltage obtained while cranking. Note ammeter reading. Replace or repair starter if current exceeds specification. See STARTER SPECIFICATIONS TABLE .
scientia non olet · About LEMON Manuals