LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Probe GL, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Crankshaft Sensor >> Installation (3.0L SHO)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation (3.0L SHO)

  1. Route sensor wiring harness through belt cover. Install sensor assembly on mounting pad, and loosely install retaining screws. DO NOT tighten screws yet.
  2. Set clearance between crankshaft sensor and vane on crankshaft pulley to .03" (.8 mm). Tighten screws to 22-31 INCH lbs. (2.5-3.5 N.m). Install lower timing belt cover. Install crankshaft pulley, and tighten bolt to 112-127 ft. lbs. (152-172 N.m). To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals