LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Probe GL, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Intake Plenum & Throttle Body >> 1.8L >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Plenum & Throttle Body: 1.8L: Removal

  1. Disconnect negative battery cable. Disconnect air duct from throttle body. Remove accelerator cables and bracket. Disconnect all electrical connectors and vacuum lines from throttle body and intake plenum.
  2. Mark and disconnect air by-pass and idle speed control hoses from intake plenum. Remove upper retaining bolts from intake plenum. Raise vehicle. Remove lower retaining bolts from intake plenum. Lower vehicle. Remove intake plenum and throttle body as an assembly.
scientia non olet · About LEMON Manuals