LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Probe GL, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Intake Plenum & Throttle Body >> 3.0L SHO >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

3.0L SHO: Removal

  1. Remove intake air boot from throttle body and mass airflow sensor. Disconnect throttle cable. Disconnect electrical connectors from TPS, air by-pass valve, vacuum switching valve and DIS module.
  2. Disconnect coolant by-pass lines. Disconnect and mark all vacuum lines from intake plenum and throttle body. Disconnect EGR pipe from EGR valve.
  3. Remove 8 bolts from intake plenum support brackets, and remove brackets. Remove bolt retaining coolant hose bracket. Remove 12 intake plenum bolts. Remove intake plenum with throttle body attached.
scientia non olet · About LEMON Manuals