LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Probe GL, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Throttle Position Sensor (TPS) >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect TPS from wiring harness. Mark throttle body and TPS for reassembly reference. Remove mounting screws and TPS. Slide rotary tangs of TPS into position over throttle shaft blade with wires pointing down. Rotate TPS clockwise to installed position.
  2. Failure to install TPS in this manner may result in excessive idle speeds. Align marks on throttle body and TPS. Secure TPS to throttle assembly with retaining screws. Reconnect wiring.
scientia non olet · About LEMON Manuals