October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test 21, Check VRS Bias

With key off and ECA disconnected, set DVOM to 20-volt scale. Turn key on, but leave engine off. Measure voltage between breakout box pins No. (+) J48 (VRS E) and (-) J7 (BAT -). If voltage is 0.8-2.2 volts, replace VR sensor. Remove all test equipment, and reconnect all components. Clear Continuous Memory, and check for fault codes. If voltage is not 0.8-2.2 volts, go to next test.