LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Tempo Base, ATX >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Ignition Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch: Installation

  1. Ensure pin slot in ignition switch is in RUN position. Turn lock cylinder approximately 90 degrees from LOCK position. This sets lock cylinder approximately in RUN position.
  2. Install ignition switch. Connect ignition switch electrical connector. Connect battery ground cable. Test ignition switch operation. Install upper shroud. Mount steering column to column mounting bracket. Install lower shroud.
scientia non olet · About LEMON Manuals