Throttle Position Sensor (CAPRI)
Unplug connector from throttle position sensor, located on VAF meter. Connect ohmmeter to sensor terminals TP and SIGRTN (Orange and Blue/Yellow wires on mating connector). Measure resistance at each throttle opening specified in THROTTLE POSITION SENSOR RESISTANCE table. Replace sensor if resistance is not within specification.
THROTTLE POSITION SENSOR RESISTANCE
| Throttle Opening | (1) Ohms | ||
|---|---|---|---|
| 1/8 | 989 | ||
| 1/4 | 1104 | ||
| 3/8 | 1278 | ||
| 1/2 | 1462 | ||
| 5/8 | 1480 | ||
| 3/4 | 1459 | ||
| 7/8 | 1144 | ||
| Fully Open | 1072 | ||
|
|||