LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel System Pressure Release >> 2.2L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel System Pressure Release: 2.2L

  1. Start engine. Release fuel pressure by either disconnecting fuel pump relay, or tripping inertia switch with engine running. Fuel pump relay is located behind left side of instrument panel, near steering column.
  2. Inertia switch is located behind left rear liftgate interior trim panel. Inertia switch connector contains White/Red, Green/Black and Black wires. After removing fuel pump relay or tripping inertia switch, allow engine to run until it stalls. Turn ignition off. Reconnect fuel pump relay or reset inertia switch.
scientia non olet · About LEMON Manuals