LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crankshaft Sensor (3.8L Supercharged) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Sensor (3.8L Supercharged): Removal

Disconnect negative battery cable. Disconnect sensor electrical connectors from wiring harness. Raise vehicle. Remove upper and lower damper shield assemblies. Rotate by HAND to position metal vane of shutter (attached to rear of damper) outside of sensor air gap. Remove crankshaft sensor mounting screws. Remove sensor.

scientia non olet · About LEMON Manuals