LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Variable Assist >> Pinpoint Tests >> Pinpoint Test C2 >> Steering Angle Sensor Resistance Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor Resistance Check

  1. Turn ignition off. Remove steering column cover and disconnect steering angle sensor connector. Set steering wheel so wheels are straight.
  2. Measure resistance between wires indicated in STEERING ANGLE SENSOR RESISTANCE TABLE  . If resistances are as specified, proceed to PINPOINT TEST C3  . If resistances are NOT as specified, replace steering angle sensor.
STEERING ANGLE SENSOR RESISTANCE

Wires k/ohms
Green & Green/White 0-15
Green & Green/Yellow 40-60
Green/Yellow & Green/White 30-50
scientia non olet · About LEMON Manuals