Power Seat Switch

Check for voltage at specified terminals for switch positions by backprobing power seat switch connector.

1. With switch positioned to FRONT - UP, 12 volts should be present at Red terminal.
2. With switch positioned to FRONT - DOWN, 12 volts should be present at Red/White terminal.
3. With switch positioned to REAR - UP, 12 volts should be present at Yellow/Red terminal.
4. With switch positioned to REAR - DOWN, 12 volts should be present at Yellow terminal.
5. With switch positioned to SEAT FORWARD, 12 volts should be present at Green/White wire.
6. With switch positioned to SEAT BACKWARD, 12 volts should be present at Green wire.
7. With switch positioned to NEUTRAL, voltage should not be present at any terminal.

Replace switch if operation is not as specified.